Priehľadná fólia z PVC
The steps for applying PVC blister film are as follows: Firstly, after we finish, we polish and spray PVC plastic special adhesive. After drying, we can make vacuum molding. According to the actual situation of some vacuum molding equipment, some doors need to be raised by one centimeter, so the...
- Rýchle dodanie
- Zabezpečenie kvality
- Zákaznícky servis 24/7
Predstavenie výrobku
Firstly, after we finish, we polish and spray PVC plastic special adhesive. After drying, we can make vacuum molding. According to the actual situation of some vacuum molding equipment, some doors need to be raised by one centimeter, so the temperature of the vacuum molding machine is generally set at around 160 degrees Celsius, the preheating time is set at around 20 seconds, and the vacuum molding time is set at around 50 seconds after the vacuum molding. After slightly reducing the temperature, we tear off the PVC film on the surface and spray adhesive on the other side of the door, Then, it is necessary to apply plastic evenly around the door, especially to ensure that the lines around the back door overlap, that is, to apply plastic twice around the door.
Populárne Tagy:
